Universal Car/Van Reverse Parking Sensor Kit 4 Sensors
Obstructions are no longer a danger when you manoeuvre or park your car. This parking sensor kit safeguards the vehicle, the obstacles and particularly any bystanders behind the car. The driver is warned of any obstructions behind the car by means of simple warning sound that increased frequency the closer you get to the object.
Complete Weatherproof sealed sensor units provide sound guidance to safe driving and parking. This easy install kit comes with all you need to install 4 parking sensors on your car. The sensors can be colour coded / painted to suit your car colour.
When you engage the reverse gear, a beep signals that the sensor has activated. Any obstacle detected is indicated by an intermittent beep signal which increases in frequency until it becomes a continuous sound as the vehicle moves near to the obstacle itself.
1 x Manual
4 x Black Sensors
|1.0 1.5 m
|0.5 0.9 m
|0.4 0.5 m
|0.0 0.4 m
The Sensors are Black by default They can be painted / colour coded to match the car colour
1 x Buzzer Unit
The Buzzer / alert unit is small enough to be hidden about the car and placed wherever you require. The beeper sound is loud enough to hear wherever it is placed
1 x Control Box
To be placed in the boot of the car near one of the rear lamps (close to the 12v power source)
1 x Power Cable
1st Wire goes to the body of the car (To Ground, negative ), 2nd wire to the Reverse light (Positive wire to power and activate the Sensor)
1 x 22mm hole Saw bit
To accurately drill the exact hole recess for the sensors. The Saw bit suits standard bumpers only and not metal bumpers.
Working voltage range 12V(10.5~16V DC)
Rated Current 50mA ~ 180mA
Detection Distance 0.2 ~ 1.5m
Sensor Frequency 40KHz
Working temperature of control box 40 ~ +80
About Parking Sensors
Parking Sensors detect obstacles behind you and also infront of you if you wish, to aid your parking and enable you to get into those tight spots without damaging your car. Using Ultrasonic technology they emit a cone of sound behind your car which bounces of obstacles behind and returns to the sensor, the time taken for these sound waves to bounce and return off obstructions behind your car is how they calculate the remaining distance behind you.